FLEXO- METER
Technical Specifications
-
Measuring Principle: Cantilever bending method
-
Test Parameter: Bending length / Stiffness
-
Specimen Width: Typically 25 mm (as per standards)
-
Specimen Length: Adjustable
-
Measurement Range: Suitable for low to high stiffness materials
-
Scale Type: Direct reading scale / Graduated scale
-
Accuracy: High precision with repeatable results
-
Operation: Manual / Semi-automatic (model dependent)
-
Construction: Rigid metal body with corrosion-resistant finish
-
Clamping System: Precision specimen holder for accurate positioning
-
Standards Compliance:
-
ISO 2493
-
TAPPI T489
-
BS 3748
-
Applications
-
Paper & Paperboard testing
-
Packaging material evaluation
-
Carton & corrugated box testing
-
Printing & publishing industry
-
Quality control & R&D laboratories
Flexo-Meter is a precision laboratory testing instrument used to determine the bending stiffness and flexural rigidity of paper, paperboard, cardboard, films, and similar sheet materials. The instrument measures the bending length of a test specimen under its own weight, which is directly related to stiffness.
It is widely used in paper mills, packaging industries, printing houses, and quality control laboratories to ensure material strength, performance, and compliance with international standards.
The Flexo-Meter provides accurate, repeatable, and easy-to-read results, making it an essential tool for evaluating the mechanical behaviour of flexible sheet materials.
Related products
PIN ON DISC WEAR TESTING MACHINE
Technical Specifications (Typical)
-
Test Type: Dry / Lubricated sliding wear test
-
Principle: Pin-on-disc tribological method
-
Disc Diameter: 100–165 mm (customizable)
-
Disc Material: Hardened alloy steel (or as required)
-
Speed Range: 100 – 2000 RPM (variable)
-
Load Range: 5 N to 200 N (dead weight or lever loading system)
-
Wear Track Radius: Adjustable
-
Friction Force Measurement: Strain gauge / load cell based
-
Coefficient of Friction Display: Digital real-time display
-
Wear Measurement: Linear displacement sensor / LVDT
-
Motor: Variable speed DC / AC motor with controller
-
Data Display: Digital display / Computerized interface (optional)
-
Data Output: USB / Software-based data logging (optional)
-
Power Supply: 220–240V AC, 50 Hz
-
Safety Features: Guard cover, overload protection
-
Standards Compliance: ASTM G99 / ISO 7148 (or equivalent)
MECHANICAL EXTENSOMETER
Technical SpecificationsÂ
-
Measurement Type: Linear elongation / strain measurement
-
Gauge Length Options: 25 mm, 50 mm, 100 mm, 200 mm (customizable)
-
Measuring Range: 0–5 mm / 0–10 mm (model dependent)
-
Least Count / Resolution: Up to 0.001 mm (with dial indicator)
-
Accuracy: ±0.5% or better
-
Output Type: Mechanical dial reading
-
Mounting: Knife-edge or clip-on attachment
-
Frame Material: Hardened steel / aluminum alloy
-
Contact Points: Replaceable knife edges
-
Compatibility: Universal Testing Machines (UTM), Tensile Testing Machines
-
Operation: Manual
-
Power Requirement: Not required
-
Application Standards: ASTM / ISO compliant models available
UNIVERSAL-TESTING-MACHINE
Technical Specifications
Load Capacity Range
-
From: 1 kN to 2000 kN (or higher depending on model)
-
Common ranges: 10 kN, 50 kN, 100 kN, 200 kN, 600 kN, 1000 kN
Machine Types
-
Electromechanical UTM
-
Servo Hydraulic UTM
-
Computerized / Digital UTM
Control Modes
-
Load control
-
Displacement control
-
Strain control
-
Pace rate control
Accuracy
-
Load accuracy: ±0.5% to ±1% of indicated load
-
Class 0.5 / Class 1 as per ISO standards
Load Measurement
-
High precision load cell
-
Multiple load cell options
Crosshead Travel
-
Typically 600–1200 mm (model dependent)
Speed Range
-
Very low to high test speeds
-
Example: 0.001 to 500 mm/min
Data Acquisition
-
Real-time force vs displacement curve
-
Stress–strain graph generation
-
PC based software with test reports
Safety Features
-
Overload protection
-
Emergency stop
-
Limit switches
-
Safety guards
Standards Compliance
-
ASTM
-
ISO
-
IS
-
EN
-
DIN
Common Tests Performed
-
Tensile test
-
Compression test
-
Flexural test
-
Shear test
-
Peel test
-
Tear test
-
Bend test
SAMPLE CUTTING PRESS
Technical Specifications
-
Operation Type: Manual / Hydraulic / Pneumatic
-
Capacity: 5 kN – 50 kN (or higher as per model)
-
Cutting Force Control: Lever / Hydraulic hand pump / Air pressure
-
Stroke Length: Adjustable stroke
-
Working Table: Hardened steel or aluminum base plate
-
Die Holder: Quick-change die holder
-
Cutting Area: Approx. 150 × 150 mm to 300 × 300 mm
-
Pressure Indication: Pressure gauge (for hydraulic/pneumatic models)
-
Frame Construction: Heavy-duty steel frame
-
Safety Features: Safety guard / Two-hand operation (model dependent)
-
Power Supply: Not required (manual) / 230V AC (motorized hydraulic)
-
Applications: Rubber, plastic sheets, foam, leather, paperboard, textile samples
SERVO CONTROLLED UTM
📊 Typical Technical Parameters
(Specifications vary by model & capacity: 100 kN–2000 kN or more)
| Parameter | Typical Range / Value |
|---|---|
| Load Capacity | 100 kN, 200 kN, 400 kN, 600 kN, 1000 kN, 2000 kN etc. |
| Load Accuracy | ±1 % or better |
| Test Speed | 0.001 to 500 mm/min (configurable) |
| Position Resolution | 0.01 mm or better |
| Control Modes | Load, strain/elongation, displacement, hold |
| Measurement Feedback | Load cell, encoder/extensometer |
| Data Output | Real-time graph, exportable results |
VASLIC RUB FASTNESS TESTER
Technical Overview
✔ Test Principle:
-
A wool felt rubbing pad (dry or wet) repeatedly rubs the sample surface under a specified pressure and stroke.
-
After a set number of cycles, color transfer and surface changes are assessed visually, typically using a grey scale for staining and color change.
✔ Typical Specifications
-
Rubbing Head Area: ~15 mm × 15 mm
-
Rubbing Speed: ~40 ± 2 cycles per minute
-
Rubbing Stroke: ~35–40 mm
-
Weight (Pressure): ~500 g finger + optional 500 g additional weight (total ~1000 g)
-
Sample Size: ~120 × 20 mm
-
Sample Tension Range: ~0–20 %
-
Power Supply: ~AC 220 V 50/60 Hz
-
Automatic Cycle Counter: Digital or mechanical with automatic stop upon reaching preset cycles
✔ Testing Conditions:
-
Dry rubbing
-
Wet rubbing (sample and/or felt soaked as per standard procedures)
✔ Compliance Standards:
Common standards this tester supports:
-
ISO 11640 – Colour fastness to rubbing (leather)
-
DIN 4843 – Leather colour fastness
-
SATRA TM173 / TM177 – Rubbing fastness methods
-
EN ISO 20344:7.3 – Footwear upper and lining tests
-
ISO 17700 Method A – Footwear material colour fastness
LEATHER ABRASION TEST MACHINE
Technical Specifications
| Parameter | Specification |
|---|---|
| Test Method | Martindale / Rotary Abrasion |
| Abrading Motion | Lissajous / Circular Motion |
| Test Stations | 4 / 6 / 8 (Optional) |
| Load Range | 9 kPa / 12 kPa (Standard Loads) |
| Abrasive Medium | Standard Wool Fabric / Sandpaper |
| Counter | Digital Preset Counter (0–99,999 Cycles) |
| Speed | 20–70 RPM (Adjustable) |
| Specimen Size | Ø38 mm / Ø140 mm |
| Pressure Application | Dead Weight System |
| Display | Digital LED / LCD |
| Control System | Microprocessor / PLC Based |
| Power Supply | 230V AC, 50 Hz |
| Safety Features | Emergency Stop, Overload Protection |
| Construction | Heavy-duty MS Frame with Powder Coating |
Salient Features
-
Accurate simulation of real wear conditions
-
Digital cycle counter with auto-stop function
-
Multiple test stations for higher productivity
-
User-friendly operation and low maintenance
-
Conforms to international testing standards
-
Rugged construction for continuous laboratory use
Applicable Standards
-
ISO 12947
-
ASTM D4966
-
BS 3424
-
DIN 53863
-
IUP 20 / IUP 60 (Leather Testing)
VAMP FLEX TESTER
Technical Specifications
-
Type: Motorized / Digital Vamp Flex Tester
-
Test Method: Repeated flexing of vamp specimens
-
Flexing Angle: Adjustable (typically 30°–90° or as per standard)
-
Number of Test Stations: 2 / 4 / 6 stations (optional)
-
Flexing Speed: Adjustable (e.g., 100 ± 5 cycles/min)
-
Cycle Counter: Digital presettable counter with auto-stop
-
Specimen Clamping: Adjustable clamps for different material thickness
-
Drive System: AC motor with gearbox
-
Control Panel: Digital controller with cycle display
-
Power Supply: 220–240 V AC, 50 Hz (Single Phase)
-
Safety Features: Protective cover, emergency stop
-
Construction: Rigid MS frame with corrosion-resistant coating
-
Standards Compliance:
-
SATRA TM 25
-
ISO 5402-1
-
IS / ASTM (as applicable)
-
Applications
-
Footwear quality testing
-
Leather and synthetic material testing
-
Rubber and polymer fatigue testing
-
Research & development laboratories
-
Shoe manufacturing quality control
Reviews
There are no reviews yet.