TENSILE SPLITTING TESTING MACHINE
Technical Specifications
-
Load Capacity: 100 kN – 2000 kN (depending on model)
-
Suitable Specimen: Concrete cylinders / rock cores
-
Specimen Size:
-
Diameter: 50 mm – 150 mm
-
Length: 100 mm – 300 mm
-
-
Loading Method: Hydraulic / Servo-controlled
-
Control Mode: Manual / Digital / Computerized
-
Load Measurement: Digital load cell
-
Accuracy: ±1% of indicated load
-
Display: Digital controller / PC software interface
-
Loading Rate Control: Adjustable pace rate
-
Compression Platens: Hardened steel with strip loading fixtures
-
Safety Features: Overload protection, emergency stop
-
Data Output: USB / Software report / Printer option
-
Power Supply: 220V / 50Hz
A Tensile Splitting Testing Machine is designed to measure the split tensile strength of cylindrical concrete or rock specimens by applying a compressive force along the vertical diameter. The induced tensile stress causes the specimen to split, allowing accurate determination of tensile strength where direct tension testing is difficult. It is widely used in civil engineering labs, construction material testing, and research facilities.
Related products
FLEXURAL STRENGTH TESTING MACHINE
Technical Specifications
Load Capacity
-
Range: 10 kN to 300 kN
-
Suitable for concrete beams, tiles, blocks, polymers, composites
Loading Type
-
Three-point bending
-
Four-point bending
Control System
-
Manual / Motorized / Servo-controlled
-
Pace rate control available
-
Closed-loop feedback system (in advanced models)
Display
-
Digital load indicator
-
Touchscreen controller (computerized models)
-
Real-time load vs deflection graph
Accuracy
-
±1% or better of indicated load
-
Calibrated load cell system
Loading Rate
-
Adjustable loading rate
-
Standard compliant loading speed control
Test Span Adjustment
-
Adjustable support span
-
Roller support fixtures
Drive Mechanism
-
Hydraulic power pack or electromechanical screw drive
-
Servo motor (in advanced systems)
Data Output
-
Software-based data acquisition
-
Test reports generation
-
USB / PC connectivity
-
Automatic peak load capture
Safety Features
-
Overload protection
-
Emergency stop
-
Limit switches
-
Guard enclosure
Standards Compliance
-
ASTM C78 / ASTM D790
-
IS 516
-
ISO standards for flexural testing
LOAD TESTING MACHINE
Technical Specifications
-
Load Capacity Range: 50 kN to 5000 kN (customizable)
-
Type: Hydraulic / Electro-Mechanical
-
Control Mode: Manual / Semi-Automatic / Computerized
-
Load Measurement: Digital Load Cell / Pressure Sensor
-
Accuracy: ±1% or better
-
Display: Digital indicator / Computer software display
-
Resolution: High resolution load reading
-
Loading Rate Control: Adjustable
-
Frame Construction: Heavy-duty steel frame
-
Power Supply: 220V / 415V AC
-
Hydraulic System: Motorized hydraulic power pack
-
Data Output: USB / RS232 / Software-based reporting (computerized models)
-
Safety Features: Overload protection, emergency stop
-
Test Modes: Compression / Tension / Flexural (depending on model)
-
Standards Compliance: IS / ASTM / BS / EN standards (model dependent)
TILE ABRASION TESTING MACHINE
🔧 Technical Specifications
| Parameter | Typical Value / Range |
|---|---|
| Test Standard Compliance | ISO 10545-6, ASTM C1027, EN 15468 |
| Test Type | Abrasion / Wear Resistance Test |
| Abrasive Medium | Silicon carbide paper / abrasive wheels |
| Number of Specimen Holders | 1–4 (varies by model) |
| Load Weight | Adjustable, typically up to 5000 g |
| Abrasion Head Movement | Reciprocating / Rotary |
| Stroke Length | ~100–200 mm (model dependent) |
| Speed of Movement | ~60–70 strokes per minute |
| Counter / Timer | Digital display with preset counts |
| Display | LED / LCD for speed, count, timer |
| Power Supply | AC 220–240 V, 50/60 Hz |
| Machine Body | Mild steel with powder coating |
| Dimensions (L×W×H) | Approx. 600×450×800 mm |
| Weight | ~50–100 kg (depending on configuration) |
TILE ABRASION TESTING MACHINE
Technical Specifications
| Feature | Specification / Option |
|---|---|
| Model Type | Single-head / Dual-head abrasion tester |
| Test Standard Compliance | ISO 10545-7, EN 14157, ASTM C1243, DIN standards |
| Number of Abrasive Heads | 1 or 2 heads |
| Turntable Diameter | ~300–400 mm (industry varies) |
| Speed Control | Variable speed (e.g., 50–150 rpm) |
| Load Weights | Calibrated weights (typically up to 1,000 g or more per head) |
| Abrasive Medium | Standard abrasive wheels/discs or sand/rubber pads |
| Test Cycle Timer | Digital timer, programmable up to several hours |
| Display | Digital/LED display for time, speed, and test status |
| Power Supply | 220–240 V AC, 50/60 Hz (or 110 V option) |
| Frame Material | Sturdy mild steel / powder-coated structure |
| Sample Size Accommodation | Large enough platform to hold standard tiles (e.g., up to 300 × 300 mm or larger) |
| Safety Features | Emergency stop, protective covers |
| Control Mode | Manual / semi-automatic / PLC touch screen (depending on model) |
| Data Output | Manual recording or digital export (optional) |
COMPRESSION TESTING MACHINE
Technical Specifications
-
Capacity Range:
50 Ton / 100 Ton / 200 Ton / 300 Ton / 500 Ton / 2000 kN -
Load Measurement:
Digital load indicator / Computerized data acquisition system -
Load Accuracy:
±1% of indicated load (Class 1) -
Loading Method:
Hydraulic compression with controlled pace rate -
Pace Rate Control:
Manual / Semi-automatic / Fully automatic -
Platen Size:
200 × 200 mm / 300 × 300 mm / Customizable -
Maximum Piston Stroke:
50 – 100 mm -
Frame Construction:
Heavy-duty welded steel frame with high rigidity -
Power Supply:
230V AC, Single Phase / 415V AC, Three Phase -
Hydraulic Pressure:
High-pressure axial piston pump -
Standards Compliance:
IS:14858, IS:516, ASTM C39, ASTM C109, BS EN standards -
Safety Features:
Overload protection, pressure relief valve, emergency stop
COMPUTERIZED TENSILE TESTING MACHINE
Technical Specifications (Typical)
-
Capacity Range: 1 kN to 1000 kN (or higher on request)
-
Drive System: Servo motor / AC variable frequency drive / Hydraulic (as per model)
-
Load Measurement: High-precision strain gauge load cell
-
Accuracy: ±1% or better of indicated load
-
Crosshead Speed: 0.01 to 500 mm/min (programmable)
-
Speed Accuracy: ±1%
-
Stroke Length: 800 – 1200 mm (customizable)
-
Grips: Wedge, pneumatic, hydraulic, compression platens, bending fixtures
-
Control Mode: Load, displacement, and strain control
-
Software: PC-based testing software with graph plotting, test methods, and report generation
-
Data Output: Load vs extension, stress vs strain curves
-
Safety Features: Overload protection, limit switches, emergency stop
-
Power Supply: 230V / 415V AC, 50 Hz
-
Standards Compliance: ASTM E8, ASTM A370, ISO 6892, BIS standards
COMPUTERIZED COMPRESSION TESTING MACHINE
Technical Specifications (Typical)
(Specifications can be customized as per capacity and standards)
-
Capacity: 500 kN / 1000 kN / 2000 kN / 3000 kN
-
Load Measurement: High-accuracy load cell / Pressure transducer
-
Accuracy Class: ±1% of indicated load (Class 1)
-
Load Frame: Heavy-duty welded steel frame
-
Platen Size:
-
Upper Platen: Hardened & polished
-
Lower Platen: Spherically seated
-
-
Ram Stroke: 50–100 mm
-
Loading Control:
-
Automatic pace rate control
-
Manual / Computerized operation
-
-
Display:
-
Computer interface with testing software
-
Real-time load, stress, and displacement display
-
-
Software Features:
-
Test method selection
-
Automatic peak load detection
-
Graph plotting (Load vs Time / Stress vs Time)
-
Test report generation
-
Data storage & export (PDF/Excel)
-
-
Power Supply: 415V / 50 Hz / 3 Phase (or 230V single phase)
-
Standards Compliance: IS 516, IS 4031, ASTM C39, BS EN standards
Reviews
There are no reviews yet.