Martindale Abrasion and Pilling Tester
Martindale Abrasion and Pilling Tester
The Martindale Abrasion and Pilling Tester is designed to evaluate the abrasion resistance and pilling tendency of fabrics and textile materials. It helps manufacturers and quality control laboratories assess surface durability, fabric wear and resistance to repeated rubbing. The machine is suitable for textile testing applications, with test configurations selected according to the material, test method and applicable standard.
OVERVIEW
Description
Martindale Abrasion and Pilling Tester
The Martindale Abrasion and Pilling Tester is a laboratory testing machine used to evaluate the abrasion resistance and pilling behaviour of textile fabrics. It helps textile manufacturers, garment manufacturers, fabric suppliers and quality control laboratories assess how materials respond to repeated rubbing and surface friction.
The machine operates using a controlled rubbing motion in which fabric specimens are subjected to repeated contact with an abrasive material or another textile surface. The resulting wear, surface damage or pilling can then be assessed according to the selected test method.
Innotech Engineering Devices Private Limited offers testing equipment for industrial and laboratory applications. Machine configuration and accessories can be selected according to customer requirements and the intended testing procedure.
Working Principle
The Martindale testing method uses a defined rubbing movement to create repeated contact between a specimen and a specified rubbing surface. Depending on the test configuration, the specimen follows a multidirectional movement commonly associated with a Lissajous pattern.
During testing, the machine applies the required specimen loading and continues the rubbing cycles for the specified duration or endpoint. The specimen is then examined to evaluate abrasion damage, surface wear or pilling formation.
The testing procedure, specimen preparation, loading and evaluation criteria should follow the applicable test standard.
Assess Pilling Behaviour
Helps evaluate the formation of small fibre balls on fabric surfaces using the appropriate pilling test procedure.
Compare Material Performance
Supports comparative evaluation of different fabrics, finishes or material batches under the same test conditions.
Support Product Development
Useful during fabric development, material selection and quality assessment for apparel, upholstery and other textile applications.
Customised Configuration
Testing stations, holders, loading arrangements and accessories can be discussed according to the required test method and application.
Frequently Asked Questions
What is a Martindale Abrasion Tester?
It is a laboratory machine used to evaluate textile abrasion resistance by subjecting specimens to repeated rubbing under defined test conditions.
What is the difference between abrasion testing and pilling testing?
Abrasion testing evaluates surface wear or damage caused by rubbing. Pilling testing evaluates the formation of small fibre balls on a fabric surface. A Martindale machine may be configured for both applications when the appropriate accessories and test procedures are used.
Which materials can be tested?
Suitable woven and knitted fabrics, apparel materials, upholstery fabrics and other textile specimens may be tested, depending on the method and equipment configuration.
Which testing standards are applicable?
Standards depend on the intended test. ISO 12947 is associated with textile fabric abrasion resistance using the Martindale method, while ISO 12945-2 addresses fabric pilling and fuzzing using a modified Martindale method. Confirm the required standard and machine configuration before ordering.
Can the machine be customised?
The available testing stations, accessories, loading arrangements and control options depend on the offered model and customer requirements.
Enquire About the Martindale Abrasion and Pilling Tester
Contact Innotech Engineering Devices Private Limited for information about machine configuration, available accessories, technical specifications and pricing.
Company: Innotech Engineering Devices Private Limited
Location: Bhiwadi, Rajasthan, India
Email: info@innotechgroup.net
Phone: +91 9810431604
WHY IT WORKS
Key benefits
Evaluate Fabric Durability
Support Quality Control
Assess Pilling Behaviour
Compare Material Performance
Support Product Development
Customised Configuration
USE CASE
Application range
BUILT IN
Features
Designed for textile abrasion and pilling evaluation.
Repeated rubbing motion for assessing fabric surface durability.
Suitable for textile quality control and laboratory testing.
Configurable testing stations, depending on the selected model.
Cycle counting and test monitoring options, depending on configuration.
Compatible specimen holders and accessories selected according to the test procedure.
Suitable for comparative evaluation of textile samples.
Configuration options based on customer testing requirements.
TECH
Technical data
Machine type
Martindale abrasion and pilling tester
Testing application
Abrasion resistance and pilling evaluation
Number of testing stations
As per selected configuration
Testing motion
Martindale multidirectional rubbing motion
Specimen holders
As per machine configuration
Specimen loading
As required by the selected test method
Abrasive material
As specified by the applicable test method
Counter
Digital cycle counter, if provided
Test cycles
User-selectable according to the test procedure
Control system
As per selected model
Power supply
As per machine configuration and customer requirements
Accessories
Specimen holders, loading weights and other compatible accessories as applicable
Applicable standards
To be confirmed according to the machine configuration and test method